Waterproofing roof coating sprays deliver seamless, spray-applied protective barriers across flat, low-slope, and sloped roofing assemblies. Engineered for compatibility with airless spray rigs, these acrylic, elastomeric, and silicone formulations seal leaks, accommodate structural expansion, bridge cracks, resist ponding water, and shield underlying substrates from intense UV radiation and premature weathering.
Need help finding the right product?
Talk to our product experts for custom solutions.
Our Range of Products
Apply Filters
ShinglEx 800 – Acrylic Asphalt Shingle Roof Sealer & Rejuvenator (5 Gal, 55 Gal Drum, 265 Gal Tote, 180 Gal Pallet, Quart Sample; multiple colors)
88% less granule loss, lab-tested results
7-year warranty on two-coat systems
Available in 7+ colors plus custom match
SiliconEx 500
Permanent resistance to ponding water
Up to 20-year material warranty
Solvent-free, single-component moisture cure
SolarEx 300
Reflects 90%+ of UV and infrared rays
Lasts 10-15 years with proper application
Airless spray compatible at 3,000+ PSI
TropEx 310
High solar reflectivity: 0.83 initial rating
310 psi tensile strength, 125% elongation
ASTM D6083 compliant elastomeric coating
ElastEx 200
High-solids formula reduces crack bridging
Covers up to 500 sq ft per gallon coat
Stays flexible in extreme temperature swings
SealEx 100
500% elongation for flexible waterproofing
Cures fully in just 24 hours
Resists salts, acids, rust, and corrosion
Frequently Asked Questions
What spray can I use to waterproof my roof?
You can use airless spray-applied formulations such as SealEx 100 elastomeric membrane or SiliconEx 100% silicone coating. SealEx 100 provides up to 500% elongation to seal leaks across metal, concrete, wood, and asphalt, while SiliconEx 500 moisture-cures into a permanent barrier against ponding water. Both apply smoothly with spray equipment.
What equipment is required to spray waterproof roof coatings?
Formulations like SolarEx 300 require an airless sprayer operating at 3,000 PSI or higher to ensure uniform atomization and correct millage. Other coatings across our line, including SealEx 100, ElastEx 200, and SiliconEx 500, are fully compatible with professional airless spray rigs, commercial-grade spray pumps, or standard manual rollers and brushes for detailing.
Can waterproofing spray coatings adhere to ponding water areas?
Yes, SiliconEx 500 is a 100% silicone, solvent-free moisture-cure formula specifically designed to resist permanent ponding water without softening or delaminating. It provides a hydrophobic, seamless membrane over flat and low-slope substrates, preventing leaks where water naturally pools around drains, parapets, roof penetrations, or low spots on membrane and built-up assemblies.
Which roof substrates are compatible with these spray coatings?
Our spray-applied coatings bond to a wide range of surfaces, including asphalt shingles, built-up roofing (BUR), modified bitumen, single-ply membranes such as TPO and EPDM, spray polyurethane foam (SPF), concrete, masonry, wood, and metal roofing systems. Compatibility depends on the specific coating selected and whether a primer like ElastEx 200 is used.
How quickly do spray-applied elastomeric membranes cure?
Elastomeric membranes such as SealEx 100 skin over within 4 to 6 hours after application and achieve a full cure within 24 hours under standard atmospheric conditions. Once cured, the water-based, low-VOC barrier can be left exposed or top-coated with reflective finishes like SolarEx 300 or FirEx 700 for enhanced solar protection.
Do reflective cool roof spray coatings also provide waterproofing?
Reflective coatings like SolarEx 300 reflect over 90% of UV and infrared radiation and act as complete waterproofing systems when installed over elastomeric basecoats like ElastEx 200 or SealEx 100. Similarly, SiliconEx 500 combines Cool Roof solar reflectivity with complete, single-layer waterproofing resistance against standing water.
What package sizes are available for commercial spray projects?
To support varied job scales, products are packaged in 5-gallon pails, 55-gallon drums, and bulk pallet or tote configurations up to 265 gallons. Contractors managing high-square-footage spray applications typically utilize 55-gallon drums or full pallet quantities for efficient loading into large-displacement commercial spray equipment.
Didn't find what you're looking for?
Talk to our experts for custom solutions and tailored guidance.
Industries We Serve
Commercial Flat and Low-Slope Roofing
Spray-applied silicone and elastomeric membranes protect commercial low-slope assemblies from standing water leaks.
Industrial Metal Roofing
Seamless waterborne coatings arrest surface rust, seal panel seams, and prevent moisture penetration across metal roofs.
Residential Asphalt Shingle Roofing
Waterborne acrylic sealers lock loose granules, revitalize weathered shingles, and prevent water ingress on sloped roofs.
Single-Ply and Foam Roofing Systems
Moisture-curing elastomeric and silicone coatings adhere to TPO, EPDM, and spray polyurethane foam roofing.
Didn't find what you're looking for?
Talk to our experts for custom solutions and tailored guidance.